Nocpix ACE 2 LRF 2.0 and Ballistic Calculator: Modes, Range and N-Link

All three Nocpix ACE 2 models have an integrated LRF 2.0 rated to a maximum of 1,300 yards. The supplied manual says ballistic calculation is available with single ranging and disabled during continuous ranging. N-Link can share single-measurement range data with a connected Nocpix device, while continuous-range data cannot be shared.

Those distinctions answer several questions the short launch announcement leaves open. This guide explains the published functions and their limits. It does not claim an independent ranging test or give a guaranteed animal-identification distance.

What Nocpix Says LRF 2.0 Improves

Nocpix describes LRF 2.0 as providing up to 57% faster ranging than the previous generation, with a maximum range of 1,300 yards. “Up to” is part of that statement. The launch material does not establish the same time improvement on every target or in every condition.

Do not read that claim as 57% more maximum range, 57% farther identification, or a fixed improvement in every step of the ballistic workflow. Ranging speed, maximum ranging distance and the visibility of a subject are different measures.

Do H35R, H50R and S60R Have Different Maximum LRF Ranges?

No. The published maximum LRF specification is the same across all three. Their thermal sensors, lenses, starting views and detection figures differ, but the shared 1,300-yard ranging specification is not a reason to move from H35R to S60R.

Ranging and thermal detection describe different functions
Model Maximum published LRF range Published thermal detection range
H35R 1,300 yards 1,970 yards
H50R 1,300 yards 2,850 yards
S60R 1,300 yards 3,400 yards

Thermal detection means registering a heat source under the relevant conditions. Ranging means measuring distance to the surface the laser receives a return from. Neither establishes that you can positively identify an animal at the advertised maximum.

Single Ranging vs. Continuous Ranging

ACE 2 ranging-mode distinctions from the manual
Function Single ranging Continuous ranging
Distance information One measurement Distance refreshed automatically
Ballistic calculation Available when correctly enabled/configured Disabled, according to the supplied manual
N-Link range sharing Single measurement and image view can be shared Continuous-range data cannot be shared

The manual describes continuous distance updates at one-second intervals. It is useful to understand this as a different mode rather than assuming the display performs every related function simultaneously. A ballistic display disappearing in continuous mode can be expected behavior.

Single ranging provides a measurement for the supported ballistic calculation. The actual display and available options depend on the relevant settings. Read the unit’s current manual rather than inferring behavior solely from a screen shown in a marketing photograph.

What the Ballistic Calculator Does—and What It Does Not Establish

The ACE 2 includes a multi-variable ballistic calculator. The manufacturer’s launch materials describe its use of distance, angle, wind drift and environmental information. That does not mean the optic independently measures or verifies every input a calculation may use.

A rangefinder supplies distance information. Other profile and environmental values must be appropriate to the setup and situation. The presence of a calculated display is not proof that every input is correct or that an animal is adequately identified.

For the full menu, profile and verification procedures, use the supplied manual and manufacturer support. This article focuses on the mode distinctions that affect a buying or ownership question, rather than replacing the operating instructions.

Why a Range Reading Can Fail or Vary

The manual identifies target reflectivity, surface texture, color, size, shape and the angle of the returning signal as factors in ranging. Smaller or less reflective subjects can be more difficult than a large reflective surface. A manufacturer maximum is therefore not a promise for every target.

Fog, rain, snow, bright conditions, a low battery or a dirty objective can also affect performance. If the measurement is outside the measurable range, the manual says the display can show dashes. A failed return does not, by itself, identify a hardware defect.

For a persistent issue, record the model, conditions, battery state, operating mode and what the display shows. That information gives support a clearer starting point than reporting only that the rangefinder “doesn’t reach the listed number.”

N-Link Is Different From Connecting the Phone App

The ACE 2 manual describes N-Link pairing with another Nocpix device to share single-measurement range data and an image view. It also says the scope’s Wi-Fi and N-Link functions cannot be active at the same time; enabling one turns the other off.

That explains why a phone-app connection can be affected after a change to N-Link settings. Media handling through the app and range-data sharing with a compatible Nocpix device are different workflows. Confirm compatibility and current firmware for the specific pairing rather than assuming the function applies to every product carrying the brand name.

Which Model Fits if Ranging Matters to You?

Since all three share the maximum LRF rating, choose the model around the image you need. H35R supplies a wider 640 view at 2×. H50R starts at 3× with a narrower view. S60R adds 1280 resolution and the widest starting view.

The rangefinder cannot compensate for a viewing format you dislike. If you want more surrounding scene, a higher price does not fix that unless the actual model specification provides it. Use the full model comparison to keep the sensor and viewing decisions separate from the shared ranging feature.

Questions Worth Asking Before Buying

  • Do you understand when the calculated display is available and when it is disabled?
  • Are you comparing maximum range, speed, target visibility or a combination of those?
  • Do you need phone-app use or device-to-device N-Link in your normal workflow?
  • Have you confirmed any intended connected device and firmware combination?
  • Do you prefer the H35R, H50R or S60R native view independently of the ranging specification?

Those answers help you evaluate a real operating system rather than selecting a scope because two feature boxes are checked. Thermal Bros can help explain the published differences and direct device-specific operating questions to the correct documentation.

Frequently Asked Questions

Does the ACE 2 ballistic calculator work during continuous ranging?

The supplied manual says it is disabled during continuous ranging. Single ranging is the supported mode for ballistic calculation.

What does the 57% improvement mean?

The manufacturer describes up to 57% faster ranging. It is not a claim of 57% more distance or an independently timed Thermal Bros result.

Can continuous-range data be shared over N-Link?

The manual says no. It describes sharing single-measurement range data and an image view.

Can Wi-Fi and N-Link run simultaneously?

The supplied manual says enabling one turns the other off. Check the current unit and firmware documentation if behavior differs.

Does S60R range farther than H35R?

The maximum published LRF range is 1,300 yards for both. Their thermal imaging systems and detection specifications differ.

Compare the Three ACE 2 Product Pages

ACE 2 H35R · ACE 2 H50R · ACE 2 S60R

Tell us your terrain, the scope you use now and the part of your current view you want to improve. Call 866-464-4461 or contact Thermal Bros. We can help narrow the choices around your budget and the image you prefer.

Sources and Review Basis

This article uses the Nocpix ACE 2 dealer sell sheet, press release, model-specific product descriptions, SKU/UPC worksheet and supplied H35R/H50R/S60R user manual. It is a specification- and manual-based launch guide, not an independent field test. Manufacturer maximums describe stated specifications, not guaranteed results in every setting. Relevant manual sections include Integrated Laser Rangefinder on printed pp.25–26, Wi-Fi/N-Link on pp.32–33, and the ballistic-calculation menus. No independent distance or timing test was supplied. Find ownership documentation through our product-manuals directory.

Continue With the ACE 2 Guides

Back to blog